BLUEHEAT/PCI OPTO - Not all operating conditions are created equal. The Blue Heat/PCI Opto adds optical isolation to the reliability and performance of the standard Blue Heat/PCI serial card, so your crucial data communications can continue without a

BlueHeat/PCI Opto - Not all operating conditions are created equal. The Blue Heat/PCI...

Request Quote
For Price

Part Number:: BlueHeat/PCI Opto
Model Number:: BlueHeat/PCI Opto
Make:: CONNECT TECH
Lead Time:: Available
Qty In Stock:: Available

Not all operating conditions are created equal. The Blue Heat/PCI Opto adds optical isolation to the reliability and performance of the standard Blue Heat/PCI serial card, so your crucial data communications can continue without a hitch. This rugged product is able to take on the most demanding of environments, such as marine, industrial, aviation and rail yard conditions, without disruption. The Blue Heat/PCI Opto adapter offers 2 and 4 asynchronous RS-232/RS-485 serial ports, individually isolated at 3.0 kV AC* for data collection devices, barcode readers, time clocks, scales and other industrial equipment requiring rugged serial communications. Simple Type: Communication Module

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

16C2850 UART's control each port providing 128 bytes of TxD/RxD FIFO buffers
Each port is independantly optically isolated to 3 kV AC peak to peak
Each RS-485 transmitter and receiver has a jumper selectable 120 Ohm termination resistor and also jumper selectable bias resistors
Easy installation comes with comprehensive manual and driver software
Independant port configuratons with baud rates from 50 bps to 921.6 Kbps, data bits of 5,6, 7, or 8; stop bits of 1, 1.5, or 2, and odd, even, stick, mark, and space parity
Optional RJ-45 to DB-9 male cables available
Supports data communications speed up to 921.6 Kbps
Supports three RS-485 modes
Two or four asynchronous RS-232, and/or RS-485/422 serial ports-each port's electrical interface is jumper selectable

Specifications

General

Baud Rate: RS-232: 50 bps-230.4 Kbps RS-485: 50 bps-921.6 Kbps
Bus: PCI
Connector: On-board RJ-45 connectors (optional RJ-45 to DB-9 male cables available)
Control Signals: RS-232: RTS, CTS, TxD, RxD RS-485: TxD, RxD, CTS, RTS
Dimensions: Width: 10.60cm Length: 19.50 (includes RJ-45 connectors) Height: 1.12cm
Electrical Interface: Blue Heat/PCI Opto: RS-232 and/or RS-485/422-each port's electrical interface is jumper selectable Blue Heat/PCI Opto 485: RS-485 only
Environmental: Temperature: (operating) 0 to 70C (storage) -40 to 150C Humidity: 95% non-condensing
I/O Addresses: Plug and Play resources require two 256 byte I/O spaces
Interrupts: Plug and Play resources require one interrupt
Memory: Plug and Play resources require a megabyte of memory address space
Optical Isolation: Each port individually isolated up to 3 kV AC peak to peak
Power Requirement: Blue Heat-2/PCI Opto and Blue Heat-2/PCI Opto 485: +5VDC@320mA (typ.) +/- 5% Blue Heat-4/PCI Opto and Blue Heat-4/PCI Opto 485: +5VDC@500mA (typ.) +/- 5%
Regulatory Compliance: FCC Class A ICES-003 EN55022 Class A EN55024
Software: Linux, QNX, SCO Unix, Solaris, Windows NT/2000 and Windows 95/98/Me/XP/CE and Windows XP Professional x64
System Requirement: One available PCI slot
Total Number of Ports: 2 or 4, depending on model
USB: 16C2580 quad UART c/w 128 byte TxD/RxD FIFO buffers

Applications

None Available

Aliases

None Available

CONNECT TECH Industrial Partner