BH0212201 - This Blue Heat/PCI Opto offers 3.0 kV AC peak to...
Request Quote
For Price
- Part Number:
- BH0212201
- Model Number:
- BH0212201
- Make:
- CONNECT TECH
- Lead Time:
- Available
- Qty In Stock:
- Available
This Blue Heat/PCI Opto offers 3.0 kV AC peak to peak Optical Isolation on all ports, and also includes differential surge protection. Simple Type: BLUE HEAT/PCI OPTO
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 16C2850 UART's control each port providing 128 bytes of TxD/RxD FIFO buffers
- 16C654 UART's control each port providing 128 bytes of TxD/RxD FIFO buffers
- A choice of a DB-9 and DB-25 fan-out cable, DB-9 external connector box or RJ-45 module (custom connector solutions offered as well)
- Dual mode interrupt scheme: PCI and ISA modes with status register ( for software that supports this feature). Improves performance and compatibility
- Each port is independantly optically isolated to 3 kV AC peak to peak
- Each RS-485 transmitter and receiver has a jumper selectable 120 Ohm termination resistor and also jumper selectable bias resistors
- Easy installation comes with comprehensive manual and driver software
- Easy installation with no DIP switches or jumpers to set- full Plug and Play
- Full duplex with RTS/CTS flow control
- Half duplex with auto TxD echo cancellation
- Independant port configurations with baud rates from 50 bps to 921.6 Kbps; data bits of 5, 6, 7, or 8; stop bits of 1, 1.5, or 2, and odd, even, or stick parity
- Independant port configuratons with baud rates from 50 bps to 921.6 Kbps, data bits of 5,6, 7, or 8; stop bits of 1, 1.5, or 2, and odd, even, stick, mark, and space parity
- Multi-drop Slave offers four-wire full duplex communications of multi-drop devices
- Multi-strike surge suppression: IEC1000-4 compatible on all signals, all ports
- Optional RJ-45 to DB-9 male cables available
- Supports data communications speed up to 921.6 Kbps
- Supports data communications speeds up to 921.6 Kbps
- Supports three RS-422/485
- Supports three RS-485 modes
- Two or four asynchronous RS-232, and/or RS-485/422 serial ports-each port's electrical interface is jumper selectable
- Two, four, or eight asynchronous serial ports in various electrical interface configurations
Specifications
- Baud Rate: RS-232: 50 bps-230.4 Kbps RS-485: 50 bps-921.6 Kbps
- Bus: PCI
- Connector: On-board RJ-45 connectors (optional RJ-45 to DB-9 male cables available)
- Control Signals: RS-232: RTS, CTS, TxD, RxD RS-485: TxD, RxD, CTS, RTS
- Dimensions: Width: 10.60cm Length: 19.50 (includes RJ-45 connectors) Height: 1.12cm
- Electrical Interface: Blue Heat/PCI Opto: RS-232 and/or RS-485/422-each port's electrical interface is jumper selectable Blue Heat/PCI Opto 485: RS-485 only
- Environmental: Temperature: (operating) 0 to 70C (storage) -40 to 150C Humidity: 95% non-condensing
- I/O Addresses: Plug and Play resources require two 256 byte I/O spaces
- Interrupts: Plug and Play resources require one interrupt
- Memory: Plug and Play resources require a megabyte of memory address space
- Optical Isolation: Each port individually isolated up to 3 kV AC peak to peak
- Power Requirement: Blue Heat-2/PCI Opto and Blue Heat-2/PCI Opto 485: +5VDC@320mA (typ.) +/- 5% Blue Heat-4/PCI Opto and Blue Heat-4/PCI Opto 485: +5VDC@500mA (typ.) +/- 5%
- Regulatory Compliance: FCC Class A ICES-003 EN55022 Class A EN55024
- Software: Linux, QNX, SCO Unix, Solaris, Windows NT/2000 and Windows 95/98/Me/XP/CE and Windows XP Professional x64
- System Requirement: One available PCI slot
- Total Number of Ports: 2 or 4, depending on model
- USB: 16C2580 quad UART c/w 128 byte TxD/RxD FIFO buffers
Applications
- None Available
Aliases
- None Available