TN049000001 - This Titan/cPCI Front I/O module offers a jumper-selectable interface (RS-232 or RS-422/485) on all ports.

TN049000001 - This Titan/cPCI Front I/O module offers a jumper-selectable interface (RS-232...

This Titan/cPCI Front I/O module offers a jumper-selectable interface (RS-232 or RS-422/485) on all ports. Simple Type: TITAN/CPCI

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

16C950 quad UARTs with 128 bytes of TxD/RxD FIFO buffers control each port.
Each RS-422/485 transmitter and receiver has jumper selectable 150 Ohm termination and bias resistors.
Easy installation comes with comprehensive manual, cable assembly (four port models) and driver software.
Independent port configuration with baud rates from 50 bps to 1.8342 Mbps (RS- 422/485) or from 50 bps to 230.4 Kbps (RS-232); data bits of 5, 6, 7 or 8; stop bits of 1, 1.5, or 2, and odd, even, or s
Male DB-9 connectors or male DB-25 connectors (four port model only) - custom cabling options are available.
Multi-strike surge suppression; IEC1000-4 compatible on all signals, all ports.
Optional 3.0K VAC peak to peak optical isolation available (rear I/O only).
Rear I/O options are available.
Two or four asynchronous RS-232, and/or RS-422/485 serial ports - each port's electrical interface is jumper selectable.

General

Baud Rate: RS-232: 50 bps – 230.4 Kbps RS-422/485: 50 bps – 1.8342 Mbps
Bus: PCI 2.1 bus compatible
Clock/Calendar: QNX 4, QNX 6, Linux and Windows NT
Connector: Titan/cPCI (2 port model): On board DB-9 male connectors Titan/cPCI (4 port model): Cable harness with DB-37 to four DB-9 or DB-25 male connectors (custom cabling also offered)
Control Signals: RS-232: RTS, CTS, TxD, RxD, DCD, DTR, DSR, RI RS-422/485: RxD ±, TxD ±, CTS ±, RTS ±
Dimensions: CompactPCI PICMG 2.0, version 3.0 compliant
Environmental: Temperature: (operating): 5°C to 70°C (storage): -65°C to 150ºC Humidity: 95% non-condensing
I/O Addresses: Assigned by Plug and Play resources
Interrupts: Assigned by Plug and Play resources
IR Interface: RS-232, RS-422/485
Power Requirement: +5 VDC +/-5% @ 300 mA (typical)
Regulatory Compliance: FCC Class A ICES-003 EN50082-2 EN55022 Class A
Supervisory: IEC1000-4 compatible multi-strike surge suppression on all signals, all ports
System Requirement: An available 3U CompactPCI expansion slot in your system
Total Number of Ports: Titan/cPCI (2 port model): 2 Titan/cPCI (4 port model): 4
USB: 16C950 quad UARTs with 128 byte TxD/RxD FIFO buffers