TN029000000 - This Titan/cPCI Front I/O module offers a jumper-selectable interface (RS-232...
Request Quote
For Price
- Part Number:
- TN029000000
- Model Number:
- TN003
- Make:
- CONNECT TECH
- Lead Time:
- Available
- Qty In Stock:
- Available
This Titan/cPCI Front I/O module offers a jumper-selectable interface (RS-232 or RS-422/485) on all ports. Simple Type: TITAN/CPCI
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 16C950 quad UARTs with 128 bytes of TxD/RxD FIFO buffers control each port.
- Each RS-422/485 transmitter and receiver has jumper selectable 150 Ohm termination and bias resistors.
- Easy installation comes with comprehensive manual, cable assembly (four port models) and driver software.
- Independent port configuration with baud rates from 50 bps to 1.8342 Mbps (RS- 422/485) or from 50 bps to 230.4 Kbps (RS-232); data bits of 5, 6, 7 or 8; stop bits of 1, 1.5, or 2, and odd, even, or s
- Male DB-9 connectors or male DB-25 connectors (four port model only) - custom cabling options are available.
- Multi-strike surge suppression; IEC1000-4 compatible on all signals, all ports.
- Optional 3.0K VAC peak to peak optical isolation available (rear I/O only).
- Rear I/O options are available.
- Two or four asynchronous RS-232, and/or RS-422/485 serial ports - each port's electrical interface is jumper selectable.
Specifications
- Baud Rate: RS-232: 50 bps – 230.4 Kbps RS-422/485: 50 bps – 1.8342 Mbps
- Bus: PCI 2.1 bus compatible
- Clock/Calendar: QNX 4, QNX 6, Linux and Windows NT
- Connector: Titan/cPCI (2 port model): On board DB-9 male connectors Titan/cPCI (4 port model): Cable harness with DB-37 to four DB-9 or DB-25 male connectors (custom cabling also offered)
- Control Signals: RS-232: RTS, CTS, TxD, RxD, DCD, DTR, DSR, RI RS-422/485: RxD ±, TxD ±, CTS ±, RTS ±
- Dimensions: CompactPCI PICMG 2.0, version 3.0 compliant
- Environmental: Temperature: (operating): 5°C to 70°C (storage): -65°C to 150ºC Humidity: 95% non-condensing
- I/O Addresses: Assigned by Plug and Play resources
- Interrupts: Assigned by Plug and Play resources
- IR Interface: RS-232, RS-422/485
- Power Requirement: +5 VDC +/-5% @ 300 mA (typical)
- Regulatory Compliance: FCC Class A ICES-003 EN50082-2 EN55022 Class A
- Supervisory: IEC1000-4 compatible multi-strike surge suppression on all signals, all ports
- System Requirement: An available 3U CompactPCI expansion slot in your system
- Total Number of Ports: Titan/cPCI (2 port model): 2 Titan/cPCI (4 port model): 4
- USB: 16C950 quad UARTs with 128 byte TxD/RxD FIFO buffers
Applications
- None Available
Aliases
- None Available