1040290221 - Xtreme/104, 2 ports, RS-232/422/485 3 KV This Xtreme/104 Opto offers...
Request Quote
For Price
- Part Number:
- 1040290221
- Model Number:
- 1040290200
- Make:
- CONNECT TECH
- Lead Time:
- Available
- Qty In Stock:
- Available
Xtreme/104, 2 ports, RS-232/422/485 3 KV This Xtreme/104 Opto offers jumper-selectable electrical interfaces for each port (either RS-232 or RS-422/485), and provides 1.0 kV AC peak to peak Optical Isolation on all ports. Simple Type: PC/104
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Each port can be independently configured for baud rate, parity, data and stop bits. IRQ lines are jumper selectable
- Each port is optically isolated from each other and the board up to 3.0 kV AC peak to peak, on all signals
- Industrial Temperature model available (-40C to 85C, -40F to 185F)
- Jumper selectable 120 Ohm termination resistor included on each RS-422/485 transmitter and receiver
- Maximum data speeds of 460.8 Kbps. Custom baud rates are also available
- Supports full duplex (4 wire), half duplex (2 wire) with auto TxD echo cancellation and multi-drop (4 wire) communication modes in RS-422/485
- Two or four asynchronous serial ports in various electrical interface configurations (jumper selectable)
Specifications
- Baud Rate: RS-232:50 bps to 230.4 Kbps RS-422/485: 50 bps to 460.8 Kbps (custom baud rates available)
- Bus: ISA bus compatible, 16 bit PC/104 connector
- Connector: 10 pin header connectors (custom connectors and optional DB-9 male cables available)
- Control Signals: RS-232:TxD, RxD, RTS, CTS RS-422/485: TxD +/-, RxD +/-, RTS +/_, CTS +/-
- Dimensions: Width: 9.60 cm/3.77" Length: 10.41 cm/4.09" (includes 10 pin headers) 1.12 cm/0.44"
- Electrical Interface: RS-232 and/or RS-422/485 (electrical interface is jumper selectable for each port)
- Environmental: Operating Temperature(standard): 0C to 70C (32F to 158F) Industrial Temperature models:-40C to 85C (-40F to 185F) Storage Temperature: -40C to 150C (-40F to 302F) Humidity: 95% non-condensing
- I/O Addresses: Eight pre-defined sets of I/O addresses are jumper selectable
- Interrupts: Jumper selectable for IRQs 3,4,5,6,7,9,10,11,12,14,15
- Optical Isolation: Each port individually isolated up to 3.0 kV AC peak to peak, 3.0 kV DC and 2.1 kV AC RMS on all signals
- Power Requirement: +5 VDC @200mA (max) +/- 5%
- Regulatory Compliance: FCC Class A ICES-003 C lass A EN50082-2 EN55022 Class A EN 55024
- Software: DOS, Linux, SCO Unix, Solaris, QNX, VxWorks, Windows 95/98/Me/ CE/CE.NET/NT/2000/XP
- System Requirement: One available PC/104 module stack connector and hardware interrupt (if required)
- Total Number of Ports: two or four
- UART Type: 16C2850 dual UARTS with 128 byte transmit and receive FIFO buffers
Applications
- None Available
Aliases
- None Available