BH040001 - Connect Tech Blue Heat/PCI RS-232 - Serial adapter - PCI - RS-232

BH040001 - Connect Tech Blue Heat/PCI RS-232 - Serial adapter - PCI...

Connect Tech Blue Heat/PCI RS-232 - Serial adapter - PCI - RS-232 - 4 ports Simple Type: BLUE HEAT/PCI RS-232

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

16C654 UART's control each port providing 64 bytes of TxD/RxD FIFO buffers
A choice of DB-9 and DB-25 fan-out cables, DB-9 external connector box or RJ-45 module (custom connector solutions offered as well)
Dual mode interrupt scheme: PCI and ISA modes with status register (for software that supports this feature) to improve performance and compatibility
Easy installation: includes board, cable assembly, comprehensive manual and driver software. No DIP switches or jumpers to set- full Plug and Play
Full modem control on all ports
Independant port configuration with baud rates from 21 bps to 1382.4 Kbps; data bits of 5, 6, 7, or 8; stop bits of 1, 1.5, or 2, and odd, even, or stick parity
Multi-strike surge suppression; IEC1000-4 compatible on all signals, all ports.,
Supports data communications speeds up to 1382.4 Kbps
Two, four, or eight asynchronous RS-232 serial ports

General

Baud Rate: 21 bps-1382.4 Kbps
Bus: 32 bit 33 MHz PCI
Connector: 2 port model: DB-9 male connectors 4 & 8 port models: DB-9 or DB-25 fan-out cable 8 port models: DB-9 external connector box RJ-45 module
Control Signals: DTR, DSR, RTS, CTS, RI, TxD, RxD, DCD
Dimensions: Height: 9.68cm/3.81 in. Length: 12.66cm/4.98 in. (includes bracket) Width: 1.50cm/0.59 in.
Electrical Interface: RS-232
Environmental: Temperature: (operating) 0 to 70C (storage) -65 to 150C Humidity: 95% non-condensing
I/O Addresses: Plug and Play resources require two 256 byte I/O spaces
Interrupts: Plug and Play resources require one interrupt
Memory: Plug and Play resources require a megabyte of memory address space
Power Requirement: 2 port model: +5 VDC@240mA (typ.) +12 VDC@32mA (typ.) 4 port model: +5VDC@280mA (typ.) +12VDC@57mA (typ.) 8 port model: +5VDC@400mA (typ.) +12VDC@144mA (typ.)
Regulatory Compliance: FCC Class A ICES-003 Class A EN50082-2 EN55022 Class A EN55024
Software: Linux, QNX, SCO Unix, Solaris, Windows 95/98/CE/Me/XP, Windows NT/2000, and Windows XP Professional x64 (contact Connect Tech for most current list)
Supervisory: IEC1000-4 compatible on all signals, all ports
System Requirement: One available 32 bit PCI slot
Total Number of Ports: 2,4,8
USB: 16C654 quad UART with 64-byte TxD/RxD FIFO buffers