CONNECT TECH Industrial Partner

Blue Heat/PCI RJ-11 - It's not always easy to find power when and where...

larger image

Request Quote
For Price
Part Number:
Blue Heat/PCI RJ-11
Model Number:
Blue Heat/PCI RJ-11
Make:
CONNECT TECH
Lead Time:
Available
Qty In Stock:
Available

It's not always easy to find power when and where you need it most. High baud rates and the convenience of on-board power set the Blue Heat/PCI RJ-11 serial card apart from the rest. With rapid data transfer rates up to 1382.4 Kbps, and 8 asynchronous RS-232 ports, this is an ideal industrial strength solution for applications that require powered serial ports for magnetic card readers, barcode scanners, weigh scales, and those serial peripherals not requiring power. The Blue Heat/PCI RJ-11 is also ideal for communication and control of industrial automation equipment. Simple Type: Communication Module

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • +4VDC or +12VDC powe provided on the six RJ-11 ports (factory configured)
  • 16C654 UART's control each port providing 64 bytes of TxD/RxD FIFO buffers
  • Dual mode interrupt scheme: PCI and ISA modes with status register (for software that suppots this feature), improves performance and compatibility
  • Easy installation with no DIP switches or jumpers to set- full Plug and Play
  • Eight asynchronous RS-232 serial ports
  • Includes SeePORT, a full featured Windows 95 software data analyzer
  • Independant port configuration with baud rates from 21 bps to 1382.4 Kbps, data bits of 5, 6, 7, or 8; stop bits of 1, 1.5, or 2, and odd, even, or stick parity
  • On-board RJ-11 connectors for six ports and male DB-9 connectors/cables for two ports
  • Supports data communications speeds up to 1382.4 Kbps

Specifications

    General
  • Baud Rate: 21 bps-1382.4 Kbps
  • Bus: 33 MHz, 32 bit PCI with read/write FIFO buffers
  • Connector: Ports 1 to 6: RJ-11 Ports 7 and 8: DB-9 male connectors (optional cable)
  • Control Signals: Ports 1 to 6: TxD, RxD, DSR, RTS, +5VDC or +12VDC Ports 7 and 8: DTR, DSR, RTS, CTS, RI, TxD, RxD, DCD
  • Dimensions: Height: 10.50cm Length: 12.25cm Width: 1.50cm Weight: 0.12 kb
  • Electrical Interface: RS-232
  • Environmental: Temperature: (operating) 0 to 70C (storage) -65 to 150C Humidity: 95% non-condensing
  • I/O Addresses: Plug and Play resources require two 256 byte I/O spaces
  • Interrupts: Plug and Play resources require one interrupt
  • Memory: Plug and Play resources require a megabyte of memory address space
  • Power Requirement: +5 VDC@400mA (typical) +/- 12VDC@144mA (typical)
  • Regulatory Compliance: FCC Class A ICES-003 EN50082-1 EN55022 Class A EN 61000-4
  • Software: Linux, QNX, SCO Unix, Solaris, Windows NT/2000, Windows 95/98/Me/XP, and Windows XP Professional x64
  • System Requirement: One available 32 bit PCI slot and ISA bracket assembly
  • Total Number of Ports: 8
  • USB: 16C654 quad UART's c/w 64 byte TxD/RxD FIFO buffers

 

Applications

  • None Available

Aliases

  • None Available