BlueHeat/PCI 20mA - The workhorse of the Blue Heat family, the Blue Heat/PCI...
- Part Number:
- BlueHeat/PCI 20mA
- Model Number:
- BlueHeat/PCI 20mA
- Make:
- CONNECT TECH
- Lead Time:
- Available
- Qty In Stock:
- Available
The workhorse of the Blue Heat family, the Blue Heat/PCI CL offers the ideal connectivity solution for applications in noisy environments over long cable lengths. It features eight ports of 20mA Current Loop interface, providing robust, industrial strength communications in the most demanding of environments. With support for the most popular operating systems and a variety of cabling options, the Blue Heat/PCI CL will ensure your data transfers proceed without disruption. Simple Type: Communication Module
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 16C654 UART's control each port providing 64 bytes of TxD/RxD FIFO buffers
- DB-9, DB-25 male cables, or DB-9 male connector box, or RJ-45 connector module available (custom cable solutions also offered)
- Each port is optically isolated (passive mode only)
- Easy installation comes with board, cable assembly, comprehensive manual and driver software- no DIP switches or jumpers to set- full Plug and Play capability
- Eight Asynchronous 20 mA current loop serial ports
- Includeds SeePORT, a full featured Windows 95/98 software data analyzer
- Independant port configuration with baud rates from 21 to 57.6 Kbps, data bits of 5,6,7, or 8; stop bits of 1, 1.5, or 2, and odd, even or stick parity
- Supports data communications speeds up to 57.6 Kbps
Specifications
- Baud Rate: 21 bps-57.6 Kbps
- Bus: 33 MHz, 32 bit PCI with read/write FIFO buffers
- Connector: DB-9 male cable harness DB-25 male cable harness DB-9 male connector box RJ-45 module
- Control Signals: TxD, RxD (passive or active)
- Dimensions: Width: 10.50cm Length: 18.00cm Height: 1.50cm Weight: 0.12kg
- Electrical Interface: 20 mA current loop
- Environmental: Temperature: (operating): 5 to 70C (storage): -65 to 150C Humidity: 5-95% non-condensing
- I/O Addresses: Plug and Play resources require two 256 byte I/O spaces
- Interrupts: Plug and Play resources require one interrupt
- Memory: Plug and Play resources require a megabyte of memory address space
- Power Requirement: +5VDC@375mA (typical) +/- 5% +/- 12VDC@320mA (maximum) +/- 10% (can be operated with +12 VDC only to conserve power)
- Regulatory Compliance: FCC class A ICES-003 EN50082-2 EN55022 Class A
- Software: Linux, QNX, SCO Unix, Solaris, Windows NT/2000, Windows 95/98/Me/XP, and Windows XP Professional x64
- System Requirement: One available 32 bit PCI slot and ISA bracket assembly
- Total Number of Ports: 8
- USB: 16C654 quad UART c/w 64 byte TxD/RxD FIFO buffers
Applications
- None Available
Aliases
- None Available
